otto lube PRODUCT
otto lube sae 0w-20
FULLY SNYTHETIC
PRODUCT DESCRIPTION
Innovative energy saving premium bi-synthetic engine oil (Pao + Ester) for modern gasoline engines. Design to meet the requirements of American, Japanese and Korean automakers.
BENEFITS
· Exceptional fuel economy due to reduced high-temperature viscosity HTHS and optimal anti-friction properties.
· Highly effective additive package and low-viscosity bi-synthetic base provide reliable cold start in the most severe conditions, thereby significantly reducing engine starting wear.
· Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements.
· The ester oil components provide excellent anti-wear properties due to the exceptional strength of the oil film, which, combined with excellent pumpability, significantly increases engine life even in “start-stop” driving modes.
· For turbocharged engines with direct injection, a unique oil formulation reduces to zero the effect of premature ignition of the fuel mixture LSPI (Low Speed Pre-Ignition)
· It is used in engines with extended oil change intervals (Long Life) and conventional.
TYPICAL CHARACTERISTICS
DIESEL ENGINE OIL 0W20
API GRADE SN+
FLASH POINT, °C 230
POUR POINT, °C -49
VISCOSITY AT 40°C, CST 36
VISCOSITY AT 100°C, CST 7.2
DENSITY @ 15°C 0.842
VISCOSITY INDEX 169
TOTAL BASE NO. MIN. 6.9
CREDENTIALS & SPECIFICATIONS
· GM DEXOS1 GEN2 ·FORD WSS-M2C947-B1 · FORD WSS-M2C947-A · CHRYSLER MS-13340
· CHRYSLER MS-6395 · HONDA HTO-06 · GM 6094M
· INFINITI · LEXUS · MAZDA · JAGUAR / LAND ROVER STJLR.51.5122 · SUZUKI
otto lube sae 0w-30
FULLY SNYTHETIC
PRODUCT DESCRIPTION
This product has excellent speed bearing protection, excellent sludge control and compatibility with polymeric materials which are used in hybrid engines. Hybrid engines tend to operate at load/speed conditions related to high efficiency points to maximize fuel efficiency. Also, the engine does not operate all the time due to the introduction of start/stop technology, fuel shut off during deceleration, etc. Thus, engine oil tends to run cooler than a normal engine. This product is specifically developed to lubricate perfectly in these circumstances. It provides the performance needed for the most recent requirements for gasoline-fueled US and Asian (i.e. Honda, Toyota, Mitsubishi) passenger cars.
BENEFITS
This Lubricant provides the following benefits when used as recommended:
- Complies with the stringent API SN quality requirements, thus contributing to better engine performance and greater fuel
- Suitable for vehicles for which the ILSAC GF-5 quality level is recommended: Fiat, Lancia, SsangYong and
- 3E Technology (Excellent Engine Efficiency): Technology that offers excellent protection for the engine against the formation of deposits at high temperature, greater control of sludge and compatibility with gaskets achieving the maximum efficiency, even with engines that use fuels with ethanol up to This helps to keep the engine cleaner and increases its durability.
- Its viscosity helps to reduce fuel consumption (2.6% according to the VID ASTM D7589 sequence test), thus maintaining protection and also reducing CO2 emissions to the atmosphere, which results in lower environmental impact.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL OW30
API GRADE SN
FLASH POINT, °C 230
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 34.6
VISCOSITY AT 100°C, CST 6.8
VISCOSITY INDEX 160
TOTAL BASE NO., MIN. 7.3
CREDENTIALS & SPECIFICATIONS
· GM DEXOS1 GEN2 ·FORD WSS-M2C947-B1 · FORD WSS-M2C947-A · CHRYSLER MS-13340
· CHRYSLER MS-6395 · HONDA HTO-06 · GM 6094M
· INFINITI · LEXUS · MAZDA · JAGUAR / LAND ROVER STJLR.51.5122 · SUZUKI
otto lube sae 5w-40
FULLY SNYTHETIC
PRODUCT DESCRIPTION
Fully synthetic lubricant, especially designed to get the high performance required by high-end vehicle engines. This lubricant stands out for its specific Long-Life properties and wear protection. Its viscosity and the use of most advanced components provide exceptional deposit control to large capacity engine, even under the most extreme environmental and operating conditions.
BENEFITS
• Its viscosity facilitates start-up, especially at very low temperatures, thereby preventing premature engine wear.
• Tests conducted show high resistance to oxidation and minimum sludge and waste formation, ensuring engine cleanliness and life.
• Recommended for high-end passenger cars and particularly for Mercedes Benz, BMW, Porsche, Audi/VW and Renault engines.
• Its high thermal stability and the synthetic nature of its composition allow for longer periods between oil changes and minimizes lubricant consumption.
TYPICAL CHARACTERISTICS
MOTOR ENGINE OIL 5W40
API GRADE SN
FLASH POINT, °C 240
POUR POINT, °C -45
VISCOSITY AT 40°C, CST 46
VISCOSITY AT 100°C, CST 15.2
VISCOSITY INDEX 169
TOTAL BASE NO., MIN. 7.2
CREDENTIALS & SPECIFICATIONS
·API SN · ILSAC GF-5
otto lube sae 10w-40
fully SYNTHETIC
PRODUCT DESCRIPTION
Multigrade lubricant oil with synthetic base specially indicated for use in modern car engines, whether petrol or diesel powered, due to its exceptional package of additives. Its thermal stability favors lower product deterioration, thereby optimizing oil change periods. Another of its advantages is its high resistance to shearing. Due to its low cold viscosity and high fluidity it also favors engine start-up and effectively protects systems equipped with hydraulic tappets.
BENEFITS • Suitable for the petrol and diesel engines of most manufacturers that require a no-service, long-life lubricant. • The synthetic base oils in its composition and its high shear stability mean wear is minimized under all engine use conditions, from cold starts to the high temperatures reached when driving. • The engine tests conducted to pass the MB and VW manufacturer’s quality levels ensure engine cleanliness and therefore a significant benefit in engine life. TYPICAL CHARACTERISTICS MOTOR ENGINE OIL 10W40 API GRADE SL CREDENTIALS & SPECIFICATIONS FLASH POINT, °C 240
POUR POINT, °C -39
VISCOSITY AT 40°C, CST 105
VISCOSITY AT 100°C, CST 15.4
VISCOSITY INDEX 144
TOTAL BASE NO., MIN. 7.2
otto lube sae 5w-30
FULLY SNYTHETIC
PRODUCT DESCRIPTION
Innovative, energy-saving ester-containing fully synthetic premium engine oil for modern gasoline engines. Designed in accordance with the requirements of American, Japanese and Korean automakers specifically for engines with direct injection systems (GDI, D4, NEO-DI, CGI DISI, I-CDTI), turbocharged.
BENEFITS
· High Fuel efficiency due to reduced viscosity and optimal anti-friction properties.
· Highly effective additive package and synthetic base provide confident cold start in any conditions, thereby significantly reducing engine starting wear.
· Due to its excellent washing and dispersing properties and the highest thermal oxidative stability, it effectively fights against all types of deposits and keeps engine parts clean throughout the entire interval between replacements. The presence of ester components in combination with optimal viscosity-temperature characteristics guarantees the highest strength of the oil film, which provides excellent anti-wear properties which combined with excellent pumpability, significantly increase engine life even in the most severe operating conditions.
· Compatible with the latest exhaust gas aftertreatment systems.
· For A special synthetic base optimizes the operation of engines with direct injection systems, with turbocharging, as well as with various mechanisms for changing the valve timing (VTEC, i-VTEC, VVT-i, VVTL-i, CVVT, VVL, MIVEC, AVCS (AVLS), CVTCS and others)
· It is used in engines with extended oil change intervals (Long Life) and conventional.
TYPICAL CHARACTERISTICS
DIESEL ENGINE OIL 5W30
API GRADE SN
FLASH POINT, °C 235
POUR POINT, °C -42
VISCOSITY AT 40°C, CST 66.2
VISCOSITY AT 100°C, CST 11.2
DENSITY @ 15°C 0.848
VISCOSITY INDEX 161
TOTAL BASE NO. MIN. 8.5
CREDENTIALS & SPECIFICATIONS
· GM DEXOS1 GEN2 ·FORD WSS-M2C947-B1 · FORD WSS-M2C947-A · CHRYSLER MS-13340
· CHRYSLER MS-6395 · HONDA HTO-06 · GM 6094M
· INFINITI · LEXUS · MAZDA · JAGUAR / LAND ROVER STJLR.51.5122 · SUZUKI
